MOTAFAR Compression Tester Automotive Petrol Gas Engine Cylinder Pressure Gauge Test Tool Kit for Ford Powerstroke 6.0L & 7.3L

Price: $49.99 - $44.99
(as of Mar 11,2022 09:44:25 UTC – Details)

Materials:
▸ 100 psi liquid filled gauge (High quality stainless steel body with added rubber boot)
▸ 300 psi Fuel & Oil rated hose
▸ All jic steel adapters
▸ Lever action suction cup, makes a handy gauge holster

Application:
▸ For a 6.0 fuel pressure test, with an allen wrench remove the plug located at the bottom front of the fuel filter housing then install the 1/4″ jic x M12-1.5 adapter. 
▸ To test oil pressure on a 6.0, you would remove the single wire, oil pressure sensor, and utilize that port with the 1/4″ jic x #4 orb adapter. (Sensor is located on top of the oil cooler housing in front of the turbo) 
▸ 7.3 fuel pressure test, there’s 2 plugs on the back of the fuel filter housing. Upper driver side is the pre-filter port, Lower passenger side is the post filter port. (Most people use the pre-filter port because its easier to get to) Then you would install the 1/4″ jic x #4 orb adapter. 
▸ 7.3 oil pressure test there are 2 options, you can remove the “single wire”-oil pressure sensor located on top front of engine, and install the 1/4″ jic x #4 orb adapter or located at the oil filter head there is a 1/8″ npt plug you can remove and then install the 1/4″ jic x 1/8″ npt adapter.

Package including:
▸ Assembled pressure test hose and gauge set
▸ Needed fittings/adapters
▸ As the picture shows
Package Dimensions ‏ : ‎ 9.88 x 9.88 x 2.32 inches; 2.39 Pounds
Date First Available ‏ : ‎ May 24, 2021
Manufacturer ‏ : ‎ MOTAFAR
ASIN ‏ : ‎ B095NYGKM7

The pressure gauge tester can test fuel or low side oil pressure. It comes with all the fittings needed for both 6.0 & 7.3 engines
The tool is primarily designed to test fuel pressure while driving
After any fuel pressure test, you have the option to leave the adapter installed, and cap it with one of the provided jic caps. The jic plug is for to plug off the end of the tool for storage
This is a must, to accurately see the pressure drop with a load on the engine.
This tool can also potentially work on many other engines, including gas engines. If the engine has a 7/16-20 thread test port at the fuel rail, just remove the shrader valve before connecting the tool