Aumzong LS Valve Spring Compressor tool, Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Engines, Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks,Replace 67605

Price: $23.95
(as of Mar 27,2022 09:27:11 UTC – Details)

Installation steps：
Remove the Valve Covers, Remove the Rocker arms and Rocker rails.
Place the Bottom Aluminum plate on the head where the rocker bolts mounted and place the middle section on top that has the stud and mount it to the head with the 2 supplied bolts make sure the tool is setting in the middle between the 2 valve springs. Hand Tighten using a ratchet and socket. Do not Over tighten you can cause damage to the head if you use a impact.
Place the top over the 2 valve springs and install supplied nut. Make sure the stud has grease on it.
Before tightening if you are using this on a head that is installed on the engine you will need to use a fitting with compressed air in the spark plug hole to keep the valves pushed close.
Slowly tighten the nut down using Hand Tool Only Do not use an impact it will cause the nut to overheat and strip threads!
After Compressing the springs you can remove the valve keepers using a magnet this will keep them from falling in the Head.
After removing keepers you can reverse the nut and slowly let the pressure off and remove the springs.
Install the new springs using the same procedure. Make sure when reinstalling the valve keepers that you get them in place so they will hold properly before releasing the pressure.
The valve spring compressor tool is great for removing old valve springs and installing new ones.
Compatible with LS Engine Firebird, Silverado, Camaro, GTO, Trans am, Corvette, CTSV, Sierra, Tahoe, Suburban, Pontiac G8 GT and more.
Valve spring compression tool for 4.8 5.3 5.7 6.0 and 6.2L LS engines，LS1 LS2 LS3 LS6 Series
Replace OE 67605。Bolts and nuts Kit built from 3/8″ Steel and cnc machined for a great fit and Durability. Tested and verified!
The product includes only the compression tool for the valve spring. As shown in the picture! Please read the instructions in the package, professional installation is highly recommended! Adding lubricant will make the job perfect