Sunluway 22100 Flywheel Locking Tool with 36mm 3/4″ Socket Wench for 6.6L Duramax Engine

Price: $14.80 - $13.99
(as of Mar 29,2022 23:34:36 UTC – Details)

Product Description

Easier work:

This tool slips into place under an easily removable inspection plate. Worked great at holding the engine solid while loosened (and tightened) the crank pulley on Duramax

Flywheel Locking Tool for 6.6L Duramax

Function

Use to lock flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.
Saving time and energy without removing the starter for the water pump replacement.

High Quality

Made of high-standard CRV steel, the flywheel locking tool is anti-rust , corrosion-resistant, and durable to use. To meet your needs and serve you for a long time

Duramax 2500 & 3500 Flywheel Holder

Work on 2500 and 3500 pickups, remove the metal spring-loaded inspection plate on the bottom of the transmission.
The tool should slide into an opening toward the engine with the top of the tool engaging the teeth of the flywheel.

36mm Socket

Use 36mm 12 point socket with 3/4″ square drive to remove harmonic balancer bolt and re-torque on installation.
36mm 12 point socket can also be used on axle nuts.

Duramax 4500 & 5500 Flywheel Holder

Work on 4500 and 5500 trucks, remove the rubber inspection cap on the bottom of the transmission.
Insert the tool at the front of the opening to engage the flywheel and hand tighten the bolt to hold the tool in place.

Application–for 6.6L Duramax engines with Allison automatic transmissions.
Duramax 2500 & 3500 Flywheel Holder—Used with Duramax 2500 / 3500 pickup. Use toothed pieces only remove metal spring-loaded inspection plate on the bottom of the transmission, then tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel.
Duramax 4500 & 5500 Flywheel Holder—Use with Duramax 4500 / 5500 trucks. Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
36mm Socket–Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and re-torque on installation.36mm 12 point socket can also be used on axle.
Benefits– Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.