kipa Timing Tool Camshaft Holder Tool kit Camshaft Holding Tool for Ford 3.5L 3.7L Edge Explorer F-150 MKX MKS MKT Sable Taurus, Easy to Hold

Price: $23.75
(as of Mar 11,2022 02:51:34 UTC – Details)

Product Description

Fitment: Compatible Vehicles as following:

Edge 3.5L 4V 2007 2008 2009 2010 2011 2012 2013 2014 Edge 3.7L 4V 2011 2012 Edge 4.0L 4V 2011 2012 2013 2014

Explorer 3.5L 4V 2011 2012 2013 2014

F-150 3.5L 4V 2011 2012 2013 2014 F-150 3.7L 4V 2011 2012 2013 2014

Flex 3.5L 4V 2012 2013 2014 Fusion 3.5L 4V 2010 2011 2012 Milan 3.5L 4V 2007 2008 2009 2010 2011

MKS 3.5L 4V 2010 2011 2012 2013 2014

MKS 3.7L 4V 2009 2010 2011 2012 2013 2014

MKT 3.5L 4V 2010 2011 2012 2013 2014

MKT 3.7L 4V 2010 2011 2012 2013 2014

MKX 3.5L 4V 2007 2008 2009 2010 2011 2012

MKZ 3.5L 4V 2007 2008 2009 2010 2011 2012

MKZ 3.5L 4V 2010 2011 2012

MKZ 3.7L 4V 2011 2012 2013 2014

Mustang 3.7L 4V 2011 2012 2013 2014

Sable 3.5L 4V 2008 2009 2010 2011 2012

Taurus 3.5L 4V 2008 2009 2010 2011 2012

Taurus X 3.5L 4V 2008 2009 2010 2011 2012 2013 2014

This is a Top Quality # 303-1248 Cam tool Kit including 2Pcs tool as listing pictures

Replace for OE Tool Number 303-1248

Timing Tool Camshaft Holder Tool kit Camshaft Holding Tool for Ford 3.5L 3.7L

Made of 4150 Steel.

New Design KIPA Timing Tool Camshaft holder Tool kit Camshaft Holding Tool

We updated the handle hold position, There is enough space to hold this tool as you are working for the Cam Holder.

Very Easy to Hold and fit tight, and hold the cams in place as designed.

Warning: Please Do wear eye protection before Holding tool for works

Use this tool to lock the crankshaft at top dead center (TDC) while performing service on your engine.

Instruction:

1. Rotate The engine to No. 1 TDC

2. Install this tool on to the flats of the camshaft

3. Perform camshaft service as required

4. Refer to the vehicle service manual for the correct camshaft to crankshaft timing Procedure

Note: The camshaft holding tool will hold the camshafts in the Top Dead Center (TDC) Position.

Once the engine is aligned to TDC, this tool is inserted into the ‘flats’ of the camshaft to hold it into position. This tool is much more accurately made than competitors flame cut offerings. Made with 4150 Quality materials.

Positions and holds the crankshaft at TDC while you perform service

Includes two cam holding plates.

Compare to similar tools: For Ford Motorcraft 303-1248, For OTC 6682 (567618), and For Stallion ST-119

This tool has a better tighter fit and secondary tensioner hold down tool is included at unbeatable Cost point. Make your work more professionally

Perfect New Design KIPA Timing Tool Camshaft holder Tool kit Camshaft Holding Tool For Many Ford 3.5L 3.7L Engines
Easy to hold, There is blank square space for handle to hold and install, You don’t have to use your fingures for timing or Take it out difficultly after using.
Fitment: They could use for 2007 – 2014 3.5L Edge; 2011 – 2014 4.0L Edge; 2011 – 2014 3.5L Explorer, F-150; 2011 – 2014 3.7L F-150, MKX; 2011 – 2012 4.0L F-150, MKX, Mustang; 2012 – 2014 3.5L Flex; 2010 – 2012 3.5L Fusion Hybrid; 2007 – 2011 3.5L Milan; 2010 – 2014 3.5L MKS, MKT;
Fitment:They could also use for 2009 – 2014 3.7L MKS; 2010 – 2014 3.7L MKT; 2007 – 2012 3.5L MKX, MKZ; 2013 – 2014 3.7L MKZ; 2011 – 2014 3.7L Mustang; 2008 – 2012 3.5L Sable; 2008 – 2014 3.5L Taurus, Taurus X;
The Tool is made of Top quality 4140 Steel. Very Easy to Hold and fit tight, and hold the cams in place as designed.