Royalo TDC, Valve and Injection Timing Repair Tool Kit Compatible with Caterpillar CAT Enegine 3-pc Set

Price: $73.99
(as of Mar 30,2022 11:18:00 UTC – Details)

Must Have Tool for adjusting injection, valve lash and TDC Valve/Injection Timing on your Caterpillar (CAT) engine!!!The Automatic Timing Lock for Caterpillar engines simplifies TDC valve/injection timing when no assistant or dedicated turning tool can be employed. Works on C-7, C-9, C-11, C-13, C-15, C-16, 3179, 3196, 3200, 3300 and 3400 Cat Engines. The Engine Barring Socket for turning over engine, makes adjusting injectors and valve lash easier. Works on Caterpillar 3200/3406 Series C13/C15/C16/3208/3400/3406e/3508/3512/3500 EUI/MUI engines and Mack E-7,E-7 ETEC engine. The Injector Height Gauge is used to Easily and Accurately obtain a dimension of 78.0 ± 0.2 mm (3.07 ± 0.01 inch) on Injector. Works on Caterpillar 3406E, C-15 and C-16 Cat engine.Packge included: 1* Automatic Timing Pin & 1*Injector Height Gauge & 1* Engine Barring Socket Instructions for UseCaterpillar Timing Lock Pin InstructionsTo install: tighten the Automatic Timing Pin into the timing access hole. Preload the spring by pushing the slide handle forward and turn it clockwise to engage either of the two locking slots. turn engine in direction of rotation until a notice “click” sound is heard. To remove: turn slide handle counter clockwise to release spring tension on the plunger. Unscrew from flywheel housing. Injector Height Adjustment Tool Instructions 1.Turn unit injector adjusting screw clockwise until the correct height is obtained.
2. Hold the adjusting screw in this position and tighten locknut. Engine Barring Socket Instructions 1. Insert the tool into the flywheel housing until it engages the ring gear
2. Then attach a 1/2-Inch square drive ratchet or breaker bar and turn.
Easy to adjust injection, valve lash and TDC Valve/Injection Timing with this CAT engine tool set
The Automatic Timing Lock for Caterpillar engines simplifies TDC valve/injection timing when no assistant or dedicated turning tool can be employed. Works on C-7, C-9, C-11, C-13, C-15, C-16, 3179, 3196, 3200, 3300 and 3400 Cat Engines. Replace for J-42083, 139-7064, 220-2793, ATL-1R, 136-4632 tool
The Injector Height Gauge is used to Easily and Accurately obtain a dimension of 78.0 ± 0.2 mm (3.07 ± 0.01 inch) on Injector. Works on Caterpillar 3406E, C-15 and C-16 Cat engine. Replace for 9U-7227 injector tool
The Engine Barring Socket for turning over engine, makes adjusting injectors and valve lash easier. Works on Caterpillar 3200/3406 Series C13/C15/C16/3208/3400/3406e/3508/3512/3500 EUI/MUI engines and Mack E-7,E-7 ETEC engine. Replace for 6749 ENL80-0054 & 9S9082 EngineTool
Packge included: 1* Automatic Timing Pin & 1*Injector Height Gauge & 1* Engine Barring Socket